Manus-Bond 73-A available in clear white, aluminum, black, and bronze is a one component room temperature curing silicone elastomeric adhesive/sealant.

Manus Bond 73-A does not require the addition of activators or catalysts. Especially designed for bonding and sealing a wide variety of structural materials such as glass, steel, aluminum and plastics and has exceptional resistance to weathering and temperature extremes. Conforms to Federal Specifications TT-S-0230C and TT-S-01543A. Also conforms to ASTM C920 and AAMA 802.3-92, Types I and II. Clear, white and black, when properly cured, meet the requirements of FDA regulation 21CFR 177.2600. USDA Accepted.

Colors

Clear white, aluminum, black, bronze. Other colors available upon request.

Packaging

10.3 fl. oz. cartridge, 1 gallon, 5 gallon and 55 gallon containers.

Surface Preparation

Apply to clean, dry surlaces free of contaminants that can adversely affect adhesion. Remove all old sealant before applying 73-A.

Painting

Painting is not recommended overany silicone. If your application requires a paintable sealant, consult Manus Products for recommended alternatives.

Storage Life

Minimum one year in unopened containers at temperatures not exceeding 80F.

Precautions

Use with adequate ventilation. Inhalation of vapor during application and cure may cause slight eye or throat irritation. In case of contact with eyes, lips, or mouth, flush thoroughly with water. If irritation persists, consult a physician. Avoid repeated, prolonged contact with skin. Do not take internally. See MSDS for additional information KEEP OUT OF REACH OF CHILDREN.